Happy 100th post to my blog! Thank everyone so much for reading. I can’t believe the amount of views my blog has had this month. It’s more than I could have ever expected. Thank everyone so much for their dedication and enthusiasm for my blog. You guys are great!
In honor of this fun day, I have a d.i.y. post to share.
D.I.Y. Cardboard Shelf
I made this cardboard shelf this afternoon. It took less than two hours and cost next to nothing. Seriously. It’s great.
Click on the photos to see a larger image.
Learn how to take a simple cardboard box that was almost trash and turn it into a functional shelf for your trinkets. This cardboard shelf measures 5″ deep and 25″ long.
1. Hot glue gun
2. Tape Measurer
3. Big cardboard box
4. Xacto knife or another cutting tool, box cutter, etc.
5. [Optional] Cutting mat, very helpful, but I used some carpeted cat scratcher thing [I'm
cheap, er, resourceful]
6. Paint, if you’d like to paint your shelf
Step 1: Tracing
1. Begin with a box and cut it and lay it flat.
2. Cut your pattern
Cut out your first rectangle of cardboard using your box cutter or Xacto knife.
During this time, you can also cut out the base of your shelf, which should measure 3 inches wide by 25 inches long. [not pictured.]
3. Trace & Cut Shelf Braces
You will also need to cut a few more pieces from the cardboard. These will be the braces or stabilizers that connect your shelf top to the base.
Measure out a triangle brace that is 3 inches wide and 3 inches deep. Make the width and depth meet at a right angle. Connect them with a straight line across the middle. Cut one out and use it as a stencil for your next ones.
4. Glue the Braces Together
Now you’re going to want to glue two of the braces together, giving it a double-thickness. This will result in four reinforced braces. I used hot glue to do this.
5. Glue the Shelf Pieces Together
Next, using the hot glue gun, glue the three cut-out cardboard pieces that are the length of your shelf. The three layers of cardboard will give it some strength.
6. Trim the edges
If you are like me and terrible at cutting, you might need to trim your edges, so that they are smooth. Now is the time to do so. It’s really important to the stability of this structure that every edge be straight and even.
7. Assemble the 3-Layer Shelf to the Back Base
Next, assemble the three layer shelf to the back base.
Have the hot glue gun ready and loaded. Mine sort of dried half-way through applying the glue.
Using the hot glue, connect the shelf to the top of the base at a 90 degree or right angle.
Hold and press down until it’s completely cooled.
Side notes:See that light shining through at the center of the angle? That’s because it wasn’t cut straight. I had to sort of seal it with hot glue. This tells me it probably won’t be as structurally sound as I want it to be.
8. Assemble the Braces to the Back and Top of Shelf
Next, add the braces for reinforced security.
9. Smooth Edges and Paint
Smooth out the edges with a pair of scissors or your knife.
Paint your shelf if desired.
10. Mount & Decorate
Finally, mount your shelf on a wall and display your hard work! I mounted with nails, but half way through I thought double sided tape would work.
There you have it! I hope you enjoy this tutorial.
Stay tuned tomorrow to see what I do with the leftover cardboard. Yes, there’s leftovers.