DIY Geometric Pegboard Tutorial

When Ryan and I moved into our new apartment, we saw it was lacking kitchen storage, but couldn’t let that stop us from signing a lease on an otherwise great place.

As a solution to our storage problem, I finally got to set up a pegboard! It’s been a dream of mine to have a pegboard. I know, I fantasize about the weirdest things for my apartment. I immediately knew it had to have some gold or copper and geometric print, of course. Since I didn’t want to spend a lot of time, I decided to go with a simple geometric triangle pattern.

DIY Geometric Pegboard

The entire pegboard cost around $15, including the paint and mounting supplies. I guess most pegboards are a bit more expensive, but we bought ours used at a local hardware store, so we got them for $5. They were a bit banged up, but mostly just dirty, so I gave them a fresh coat of white paint.

Peg Board-11

If you decided to do this tutorial, or any pattern on a white pegboard, I recommend giving it a base coat of paint. A coat white paint (I used some leftover semi-gloss) makes it much more vibrant.

You will need:
-two pegboard panels
-white paint (I used some leftover semi-gloss)
-paint brush
-spray paint (I used Copper Rust-Oleum)
-painter’s tape
-drop cloth
-triangle stencil (see instructions below for making your own)
-two pieces of 1-inch bracing wood, the length of your board
-mounting screws with anchors
-nails

For Triangle Stencil
-x-acto knife/box cutter
-cardboard
-pencil
-paper
-scissors
-ruler

To Make the Stencil

Fold a piece of paper in half, lengthwise and draw a few half-triangles on the crease. I used a ruler to help with creating straight lines.

While the paper is still folded, cut out the half triangles. Select the size you want for the stencil.

Peg Board-1

Trace the paper cut-out onto a piece of cardboard.

Peg Board-2

Using an X-acto knife, cut out the triangle to create your stencil.

Peg Board-3

Decorating the Pegboards

Decorate your pegboards before mounting them. Place some drop cloth on the ground in a well-ventilated area. Coat the pegboards with a layer or two of white paint, waiting for the paint to dry in between coats.

To create a more symmetrical look with your design, try to center your stencil one the same pattern of peg holes. I found that centering the triangle on these five holes created a good guide.

Peg Board-5

Using the painter’s tape, secure your stencil to the board. Standing about a foot away, spray your paint with a consistent stream until you’ve filled the stencil.

Peg Board-4

If it’s a particularly windy day, you might want to cover up more of your board with a few pieces of cardboard, to keep the spray paint from accidentally splashing over onto the white parts

Peg Board-6

Continue with this strategy as you continue to put triangles around the board.

Peg Board-7

Mounting the Pegboard

To mount the peg board, you’ll want to frame it on the top and bottom with a piece of bracing wood that’s the length of the combined boards. It’s important that you mount the pegboard onto this frame, instead of mounting it directly onto the wall, because you need space for the pegs behind the board.

We used this very helpful step-by-step tutorial.

I really love the way we can store our pots and pans on this pegboard. And boy, do we have a lot of them.

Peg Board-11

Every time I see the geometric triangle pattern, I can’t help but smile at how fun and modern it is. It’s definitely one of my favorite pieces in the kitchen.

3 thoughts on “DIY Geometric Pegboard Tutorial

Leave a Reply

Your email address will not be published. Required fields are marked *